JIM PROJECT ENGINEERING | Mechnical Electrical Workstrack record
1995 | 2001 | 2005 | 2015
NO
COMPANY
DESCRIPTION
DATE
2018 back to top
1
KVC INDUSTRIAL SUPPLIES SDN BHD
To move 3 case and stuff into container complete with chocking, lashing and fumigation at Dumex, Nilai
Sept 13-16
2
MARUKA (M) SDN BHD
Blow Mold Injection installation works
July 27-Sept 30
3
SPARTAN PACKAGING
Unstuff 1x40 ft container including unpack and move in to position
Jul 2-3
4
COLGATE PALMOLIVE (M) SDN. BHD.
Conduct shaft coupling allignment and levelling of Mespack machine at Colgate,PJ
Jun 18
5
AKZO NOBEL INDUSTRIAL COATINGS
Supply heat treatment wooden crate and vacuum packing of 1 unit spray system machine at Nilai
Jul 18
6
KELLOGG ASIA PRODUCTS SDN BHD
Door to door delivery of 2 units Mill Roll motor and gear box from Kellogg Asia Bandar Enstek to Libstar Johannesburg including packing, fumigation, loading and double handling thru JIM warehouse
Jul 2-27
7
MARUKA (M) SDN BHD
Unloading, unpacking and installation of 1 complete assembly line machinery at Sakamoto Banting
May 30-Jun 8
8
COLGATE PALMOLIVE (M) SDN. BHD
Dismantle and replace gearbox at Axion Mixer in Colgate
Mar 24-26
9
SPARTAN AUTOMATION SDN BHD
Unstuff 2x40ft container including unpack and move in to position the Mespack Equipments at Colgate PJ
Mar 3-15
10
KELLOGG ASIA PRODUCTS SDN BHD
Springbok Process and Packing Equipment Relocation
Mar 12-23
11
ASSA ENGINEERING
Unpack and install Rotary Table
Mar 5
12
MISSION FOODS (M) SDN BHD
Move 1 unit of spiral conveyor cleaning tank complete with extend water pipe, compressed air pipe and PVC drain pipe
Feb 9-11
13
KELLOGG ASIA PRODUCTS SDN BHD
Dismantle and replace Line 3 mill roll
Apr 2-5
14
COLGATE PALMOLIVE (M) SDN. BHD.
Dismantle and replace gearbox at Axion Mixer in Colgate
Feb 4
15
DENSO (MALAYSIA) SDN.BHD.
Replace Injection Moulding sliding door at Denso
Mar 10
16
MARUKA (M) SDN BHD
unloading container, unpacking and installation of 1 complete unit Casting Machine c/w accessories at Daihatsu Perodua Factory in Sendayan
from 29-Dec-17 to 27-Feb-18
 
 
 
 
2017 back to top
1
DENSO (MALAYSIA) SDN.BHD.
To move, pack and stuff into container 1 unit of mold at Denso Bangi
Aug-28
2
DENSO (MALAYSIA) SDN.BHD.
1. To move, pack and stuff into container 1 unit of mold at Denso Bangi, 2. Unstuffing, unpacking, move and position onto SQDC 2 units of mold
July 12-13
3
DENSO (MALAYSIA) SDN.BHD.
Move water tank, removal of top cover of NB3 Muffler, lift and temporary support of Muffler for welding of flanges by others including reinstall upon completion of weldings
Jun 30-Jul 4
4
DENSO (MALAYSIA) SDN.BHD.
lot-6 construction for return back to Technimode
Jul 17-Aug 15
5
DENSO (MALAYSIA) SDN.BHD.
Unload, unpack, moving, and install 1 unit 1300T Injection Moulding Machine at Denso Bangi including installation of SQDC rail and Robot installation
May 23-Jun 19
6
ASSA ENGINEERING
Dismantling and remove rotary table also including reinstallation upon repair completion at Enkei Factory Rawang
Oct 30-31
7
MATTEL MALAYSIA SDN BHD
Levelling of launder and die casting machines for all 4 lines c/w strengthening the launder support
Oct 14-19
8
MISSION FOODS (M) SDN BHD
Hot insulation of shortening pipe
Setp 27-Oct 28
9
MATTEL MALAYSIA SDN BHD
Levelling of 2 units die cast machine at launder 2 (die cast 23 and 42)
Aug 18-19
10
MISSION FOODS (M) SDN BHD
1). Supply and install 2 nos of droppers of compressed air pipe in sanitation room. 2). Material and manpower to modify process water pipe at Line 5.
Jul 10-Sept 27
11
AKZO NOBEL INDUSTRIAL COATINGS
Supply heat treated wooden crates and vacuum packing of 2 units machines (salt spray and lab bead mill) in Johor Bharu
Jul 13
12
AKZO NOBEL INDUSTRIAL COATINGS
Supply wooden crate and vacuum packing of 3 units machine at NS Bluescope Kapar, fabricate 2 wooden crates for Bluescope packing (Q-FOG&QUV) including transportation to JIM warehouse c/w loading
Jul 5-7
13
MISSION FOODS (M) SDN BHD
Spiral conveyor water piping for conveyor cleaning and drain water piping
Jun 13-Jul 25
14
MISSION FOODS (M) SDN BHD
Compressed air piping for 7 mixers, diverters, including to run new branch pipe to silos complete with pipe connections to vibrosieve
Jun 13-Jul 17
15
SEEDRI INTERNATIONAL SDN BHD
Install equipments and piping works for jacket hot water system and install hot water pipe for cleaning in production 10 nos of sus pipe
May 8-Jun 16
16
MATTEL MALAYSIA SDN BHD
Conduct measurement to check levelling of launder and die casting machine using a combination of optical instrument and laser
May 3-4
17
SEEDRI INTERNATIONAL SDN BHD
Manpower to rework the chill water and hot water piping
Apr 6-12
18
MISSION FOODS (M) SDN BHD
Unloading, move and install Line 6 machinery at Area B, Mission Foods
Mar 23-Jul 15
18
SEEDRI INTERNATIONAL SDN BHD
Install tanks, boilers and heat exchanger at utility room including piping works
Mar 10-24
19
MISSION FOODS (M) SDN BHD
Fumigation 1 x 40ft container at Mission Foods for Ilapak machine
Feb 25
20
MISSION FOODS (M) SDN BHD
Manpower to remove existing Ilapak machine, and replace with new including vacuum pack old Ilapack machine and install x-ray and check weigher machine
Feb 8-9
21
MISSION FOODS (M) SDN BHD
Unstuffing 7x40ft container for Fritsch line at Mission Foods
Feb 8-Mar 9
22
DENSO (MALAYSIA) SDN.BHD.
Remove NB4 oven section and reinstall upon completion of inspection By Denso including removal of conveyor for access
Jan 29-Feb 2
23
MISSION FOODS (M) SDN BHD
Supply tools and equipments for flat bread line install
Jan 11-Feb 10
24
MISSION FOODS (M) SDN BHD
10x40ft container for fritz Line and 1x40ft container for Ilapak machine at Mission Foods
Jan 3- work in progress
25
MISSION FOODS (M) SDN BHD
Oil and Flour Line Installation
Jan 17- work in progress
26
COLGATE PALMOLIVE (M) SDN. BHD
Install TW Line at Colgate PJ
Jan 17-18
27
DENSO (MALAYSIA) SDN.BHD.
Leveling and alignment of Fin Forming core assembly machine during CNY shutdown
Jan 29-Feb 2
28
NESTLE MANUFACTURING (M) SDN.BHD.
Relocating 1 unit Homogenizer from reserve machinery store to 1st floor including temporary moving of existing Homogenizer (weekend and CNY public holiday (PH) works)
Jan 29-Feb 2
2016 back to top
1
MISSION FOODS (M) SDN. BHD.
Supply and install compressed air piping for New Pizza Line BP 800, 8 droppers
Dec-16
2
COLGATE PALMOLIVE (M) SDN. BHD.
Unstuffing 4x40ft HC, unpacking, move and install, levelling and allignment for Ronchi machine line in Colgate, PJ
Dec-16
3
DENSO (MALAYSIA) SDN. BHD.
Remove NB4 oven fan, inlet and exit at degreasing and reinstall upon completion of cleaning.
Dec-16
4
MISSION FOODS (M) SDN. BHD.
Supply gas pressure release pipe & chimney, fresh air intake ducting, s/s hot air ducting and insulation at Mission Foods
Dec-16
5
NESTLE MANUFACTURING (M) SDN. BHD.
Relocate bottle inspection conveyor and associated machinery from machinery store and sauce area and supply tools and labour to unload new conveyors and mechanical installation of the entire system.
Nov-16
6
COLGATE PALMOLIVE (M) SDN. BHD.
Relocation of techmar Line from ground floor to 1st floor at CP Malaysia
Nov-16
7
COLGATE PALMOLIVE (M) SDN. BHD.
Uncrate and move Emzo Line from storage shed to ground floor production area at CP Malaysia
Nov-16
8
MISSION FOODS (M) SDN. BHD.
Unstuffing 5 x 40ft container at Mission Foods.
Nov-16
9
MISSION FOODS (M) SDN. BHD.
Supply manpower, tools & equipment and transportation for office move from Mission Foods Port Klang to Bandar Enstek inclusive of approximately 250 boxes, 16 file cabinet, 1 set of server cabinet, also 1 unit if safe
Nov-16
10
MISSION FOODS (M) SDN. BHD.
Supply tools and equipments for platform installation
Nov-16
11
NESTLE MANUFACTURING (M) SDN. BHD.
Relocate Miniline & pallets from Sauces area to reserved machinery store at Nestle PJ
Oct-16
12
KELLOGG ASIA PRODUCTSSDN. BHD.
Dismantle and replace Line 4 Mill Roll
Oct-16
13
MISSION FOODS (M) SDN. BHD.
Unpack, move and install Line 5 machinery at Bandar Enstek
Jun-16
14
NS BLUESCOPE MALAYSIA (M) SDN. BHD.
Hacking of foundation, removal of roof and relocation of 1 unit 40ft container within Bluescope area
Jun-16
15
BLUESCOPE STEEL (M) SDN. BHD.
Pre-melt pot replacement
May-16
16
MISSION FOODS (M) SDN. BHD.
Unstuffing 3 units 40ft container and 2 units 40ft flat rack at Mission Foods, Bandar Enstek
May-16
17
KELLOGG ASIA PRODUCTSSDN. BHD.
Dismantle Line 4 & dismantle Line 5 Mill Roll and reinstall in Line 4
Jun-16
18
KELLOGG ASIA PRODUCTSSDN. BHD.
Dismantle and replace Line 3 Mill Roll
Jul-16
19
MISSION FOODS (M) SDN. BHD.
Unstuffing 5 units 40ft container and 3 units 40ft flat rack at Mission Foods, Bandar Enstek
Jul-16
20
MISSION FOODS (M) SDN. BHD.
Unpack, move and install New Pizza Line machinery at Bandar Enstek
Jul-16
21
KELLOGG ASIA PRODUCTSSDN. BHD.
Unpacking, move and stuffing of Line 6 equipments including supply of 5 units 40ft containers
Aug-16
22
KELLOGG ASIA PRODUCTSSDN. BHD.
Manpower and tools to dismantle and reinstall Line 6 Mill Roll after oil seal replacement
Aug-16
23
MISSION FOODS (M) SDN. BHD.
Dismantle, move, temporary packing, loading, transportation,unload,move and install Pizza line 1 and 2 machinery from Port Klang to Bandar Enstek
Aug-16
24
KELLOGG ASIA PRODUCTSSDN. BHD.
Manpower and tools to dismantle and reinstall line 2 Mill Roll after oil seal replacement
Sep-16
25
MISSION FOODS (M) SDN. BHD.
Dismantle, move, temporary packing, loading, transportation, unload, move and install Tortilla Line 1 and 2 machinery from Port Klang to Bandar Enstek
Oct-16
26
DENSO (MALAYSIA) SDN. BHD.
Removal, shifting and reinstallation of Condenser Helium Test machine & Helium Leak Test machine including relocation of Flux showering machine
May-16
27
DENSO (MALAYSIA) SDN. BHD.
Manpower, equipment, tools and consumables to dismantle, move out, loading trucks, blank pipes and ducting for NB2 Oven Line disposal and dismantling of Helium Leak Test room c/w aircond removal, Bomba Piping & ducting at Denso Bangi
May-16
28 DENSO (MALAYSIA) SDN. BHD.
Marking, dismantling, moving, alignment and installation of NB3 oven from plant 101 to 102 including dismantling and reinstall of Furnace conveyor. Dismantle and remove double hoist overhead crane also including monorail beam.
Removal, shifting, reinstallation and levelling of 2 unit Tube Bending machine from Plant 101 to 102
Removal, shifting, reinstallation and levelling of 1 unit welding machine, 4 unit of crimping machine, and 2 unit of Helium machine from 102 to 101.
Jun-16
29
DENSO (M) SDN. BHD.
Removal,shifting, reinstallation and levelling of MF 2 & 3 Fin Forming machine within plant 101 at Denso Bangi
Apr-16
30
COLGATE PALMOLIVE (M) SDN. BHD.
Relocation of Ausere Line 1 at CP Malaysia
Apr-16
31
MISSION FOODS (M) SDN. BHD.
Unstuffing 1 unit 20ft open top container and 1 unit 40ft container at Bandar Enstek
Feb-16
32
BARRY CALLEBAUT MALAYSIASDN. BHD.
Press and auxiliary equipment dismantling, packing, stuffing into the shipping containers. (Dismantling of Presses DP1 and DP 2) Press and auxiliary equipment dismantling, packing, stuffing into the shipping containers.
(Dismantle Press no:5) Grinding/refining equipment and auxiliary equipment dismantling, packing, stuffing into the shipping container (Dismantle 4 units of Ball mills (line 2 and Ghana nibs lines) and 2 units of Nibrotom from line 2) Alkalizer cleaning, inspection, packing and delivery to port. Repacking Press Morinaga for shipment. Melters and auxiliary equipment dismantling, partial cleaning, packing, shipping, Melters reassembly in BCMM (Pasir Gudang)
Press and auxiliary equipment dismantling, packing, stuffing into the shipping containers (Dismantling of Presses DP1 and DP 2)
Feb-16
-
Apr-16
2015back to top
1
NUTRICIA INFANT NUTRITION LTD.
Relocation of 1 complete Eazypack line from Dumex Shanghai to Nutricia, Ireland
Nov-15
2
K LINE LOGISTICS (M) SDN. BHD.
Transportation from KLIA to Putrajaya c/w unloading and unpacking, including transportation back to Kawasaki Bukit Jelutong
Oct-15
3
K LINE LOGISTICS (M) SDN. BHD.
Delivery from Penang port to Prai, 2 sets complete gas engines / turbines / generator c/w accessories
Oct-15
Dec-15
4
PERODUA MANUFACTURING SDN. BHD.
Knuckle E machining line installation including electrical and piping
Sep-15
5
ONE-POINT HEALTHLABSDN. BHD.
Packing, lifting, moving, loading, transportation from UPM Serdang to Mardi selected equipments(6 units) and position at final location at ground floor
Sep-15
6
INTERFLOUR R&D AND COMMERCIALISATION CENTRE
Packing, lifting, moving, loading, transportation from UPM Serdang to west port Klang selected equipment, machinery & furniture and position at final location at ground floor and in storage into 40ft containers
Jun-15
7
SAF-HOLLAND (MALAYSIA) SDN. BHD.
Install racking system at warehouse complete with support bracket
May-15
2014
1
KELLOGG ASIA PRODUCTSDN. BHD.
Mechanical Installation Work for Kellogg Tricfecta Project
Sep-14
2
NS BLUESCOPE MALAYSIASDN. BHD.
CS45 - ILP 2nd SMP Package Construction of the new ILP Chemical Tower and Equipment
Apr-14
3
PERODUA MANUFACTURINGSDN. BHD.
Knuckle D46T (Alza) 2 unit new machine installation including relocate of OP-20C at Knuckle Line-C
Apr-14
4
NESTLE MANUFACTURING (M) SDN. BHD.
Installation of Knuckle D87A including wiring, piping and platform installation
Mar-14
5
NESTLE MANUFACTURING (M) SDN. BHD.
Shifting 2 wooden crates with AHU and 8 CIP tanks to new location at Nestle Bintang Project Site, Shah Alam
Mar-14
6
DENSO (M) SDN. BHD.
Provide manpower, equipment, tools and consumables to dismantle, move out, loading trucks, blank pipes and ducting for NBI Oven Line at Denso Bangi Provide Manpower, equipment, tools and consumables to dismantle, move out to storage area, blank pipes and ducting for flux coating equipment at Denso Bangi Internal move of Helium machine (leak checker) from P101 to P102 including electrical work from bus duct to machine panel
Mar-14
7
NS BLUESCOPE MALAYSIASDN. BHD.
ILP No.1 Shutdown dismantling of mechanical and electrical equipment in the MCL chemical treatment section and No.2 coater
Mar-14
8
MONDELEZ MALAYSIASDN. BHD.
Dismantling and re-installation works of part of forming Line 3 to facilitate temporary installation of NEM Rotary Molder for testing purposes
Jan-14
2013  
1
PERODUA MANUFACTURINGSDN. BHD.
Unloading, unpacking, moving, positioning and leveling of 22 units machine for step 2 all domestic machine (local) at Perodua Global including transportation from loading bay to factory including clearing the Debris (including standby time, manpower, forklift, tools and equipment
Dec 2013
2
PERODUA ENGINE MANUFACTURINGSDN. BHD.
Unloading, unpacking, installation and leveling transportation from loading bay to factory including clearing the Debris
Dec 2013
3
SAF-HOLLAND (MALAYSIA) SDN. BHD.
Install racking system at warehouse complete with support bracket
Dec 2013
4
PERODUA MANUFACTURINGSDN. BHD.
Dismantling 1 unit washing machine, 2 units of Robot and 3 units of Danobat machine complete with gantry including transportation of machine within Perodua area using forklift
Oct 2013
5
NS BLUESCOPE MALAYSIASDN. BHD.
Major works of Project Dolphin - Prime and Finish, Oven dismantling and installation work
Sep-13
Feb-14
6
PERODUA ENGINE MANUFACTURINGSDN. BHD.
M&E Installation works for CB-2 OP-13 new washing machine
May 2013
7
NICOM STEEL (M) SDN. BHD.
Dismantle sound proof room top side for press No 2 including cover of machine also includes dismantling of feeder and installation of feeder and control panel
Apr 2013
2012  
1
ALIRAN TENAGA TECHNOLOGYSDN. BHD.
Moving, loading, unloading and tranportation for Moving, loading, unloading and tranportation for
Dec 2012
2
ALIRAN TENAGA TECHNOLOGYSDN. BHD.
Insurance, lifting, moving, loading, customs clearance, transportation from Soode Singapore to Soode Tebrau Johor, unloading, moving and positioning 16 units press machine c/w accessories
Dec 2012
3
NESTLE MANUFACTURING (M) SDN. BHD.
Uncrating Santung Machine, removing, plastic wrapping and aluminium foil, re vacuum packing wrapping and aluminium foil, re vacuum packing plywood crate wall at Nestle PJ
Nov 2012
4
DENSO (M) SDN. BHD.
New wire wrapping machine shifting at Denso Bangi
Oct 2012
5
NESTLE MANUFACTURING (M) SDN. BHD.
Dismantling, lifting, moving, packing, loading, customs clearance, transportation from Nestle PJ to Nestle Jurong, Singapore 1 unit complete milk powder mixing system
Oct 2012
6
NESTLE MANUFACTURING (M) SDN. BHD.
Dismantling cold sauce palletiser, depalletiser, feeder & milk powder packing line 1 & 2, moving out of building packing m/c for storage at nestle PJ yard
Oct 2012
7
PERMANISSDN. BHD.
Remove 1 unit Berchi Pet Filler Head unit and 3 small pallets accessories from ground floor store and lift uo to 1st floor production area at Permanis Bangi plus lifting of 2 boxes height 92' to 1st floor (weight not exceeding 1 ton for each item)
Oct 2012
8
DUMEX LTD, THAILAND
Dismantling, lifting, moving, packing, loading, customs clearance, transportation from Dumex customs clearance, transportation from Dumex rotary valve and butterfly valves - by road
Oct 2012
9
BARRY CALLEBAUT MALAYSIA SDN. BHD.
Mechanical installation works for Deo Plant Uprade
Sep 2012
10
NESTLE MANUFACTURING (M) SDN. BHD.
Supply aluminium foil & plastic sheet to coverSMI machine boxes and transfer to store
Sep 2012
11
ALIRAN TENAGA TECHNOLOGYSDN. BHD.
Customs clearance,transportation from Port Klang to Panasonic Shah Alam, unloading, moving and installing 1 unit 600T Komatsu Press Machine c/w accessories including double handling of all items thrue JIM warehouse
Sep 2012
12
NESTLE MANUFACTURING (M) SDN. BHD.
Vacuum packing of 1 unit Santung filling machine at Nestle, PJ
Aug 2012
13
DENSO (M) SDN. BHD.
Dismantling, Moving, positiong, re-assembly & levelling of 2 units flux powder machine (MBU1 & MB3) at Denso Bangi
Aug 2012
14
NESTLE MANUFACTURING (M) SDN. BHD.
Dismantling and removing 2 units old culture tanks and replacing 2 new tanks in its place at 1st floor yogurt line at Nestle, PJ
Aug 2012
15
DENSO (M) SDN. BHD.
Installation and dismantling work for 2 units of hydraulic vending maching at Denso Bangi
Jul 2012
16
UN-WORLD FOOD PROGRAMME (UNHRD)
Moving services from current WFP office and warehouse in TUDM Subang To WFP-UNHRD Subang, new office and warehouse complex
Jul 2012
17
ALIRAN TENAGA TECHNOLOGYSDN. BHD.
Lifting, moving, normal packing into wooden box, loading into lorry and fumigation at Mineabea S.Petani for 1 unit Axel 300 Press machine c/w accessories
Jun 2012
18
ALIRAN TENAGA TECHNOLOGYSDN. BHD.
Internal shifting of 4 units injection moulding machine at Panasonic Shah Alam including alignment and levelling of machines (from alignment and levelling of machines (from
Jun 2012
19
ALIRAN TENAGA TECHNOLOGYSDN. BHD.
Lifting, moving, vacuum packing into wooden box, loading into containers, fumigation for 1 unit Aida PMX200T Press Machine c/w accessories
Jun 2012
20
AIR PRODUCTS SPECIALISED PROCESS EQUIPMENTSDN. BHD.
Unstuff Bending Machine from 1 x 40' containers, unpack and position at Air Products factory Tg. Langsat, Johor
Jun 2012
21
NESTLE MANUFACTURING (M) SDN. BHD.
Unloading container, moving into JIM warehouse, storage charges, reloading onto truck, transport to Nestle Shah Alam and unloading at site
May 2012
22
NUTRICIA INFANT NUTRITION LTD.
Relocation of 1 complete eazy pack line from Dumex Nilai to Nutricia, Ireland
May 2012
23
GEA NU-CON LIMITED
Relocation of 1 complete Blender and Tipping Line from Dumex Nilai to Auckland
May 2012
24
WFP UNITED NATIONS HUMANITARIAN RESPONSE DEPOT
Supply 1 x 3T forklift (with Driver)
May 2012
25
IDS MANUFACTURINGSDN. BHD.
Unstuffing and unloading 1 x 40' Container
May 2012
26
BARRY CALLEBAUT MALAYSIA SDN. BHD.
Unstuff m/c from 1 X 40’ & 1 X 20’ COC containers and restuff into 1 X 40’ & 1 X 20’ SOC containers
May 2012
27
WFP UNITED NATIONS HUMANITARIAN RESPONSE DEPOT
Manpower Supply
May 2012
28
BARRY CALLEBAUT MALAYSIA SDN. BHD.
40ft High Cube Container Rental
Apr 2012
29
PERODUA MANUFACTURING SDN. BHD.
Dismantling and shifting 1 unit JTEKT machine and 1 Unit Danobat machine from foundation c/w equipment and accessories and reassemble both machine and equipment including levelling at Perodua factory
Apr 2012
30
COLGATE PALMOLIVE (M) SDN. BHD.
Transportation from CP Villawood NSW to Sydney Port, forwarding, customs formalities,  fumigation, port charges, THC, ocean freight to Port Klang, forwarding, customs, local charges, delivery to CP PJ, unstuffing, uncrating, moving and positioning 1 complete packaging machinery.
Mar 2012
31
BARRY CALLEBAUT MALAYSIA SDN. BHD.
40ft High Cube Container Rental
Mar 2012
32
BARRY CALLEBAUT MALAYSIA SDN. BHD.
Unstuff m/c from 1 X 40’ & 1 X 20’ COC containers and restuff into 1 X 40’ & 1 X 20’ SOC containers
Feb 2012
33
BARRY CALLEBAUT MALAYSIA SDN. BHD.
Install Hacos Depositor at Barry Callebaut, Port Klang
Feb 2012
34
CADBURY CONFECTIONERY MALAYSIA SDN. BHD.
Unstuffing 1 x 20' container, shifting and moving Novafima Line 1 & Line 2, Sispack Line, Yamato Novafima Line 1 & Line 2, Sispack Line, Yamato and 1 unit old Conche c/w feeding conveyor to store at Cadbury, Shah Alam
Jan 2012
2011back to top
35
IDS MANUFACTURING SDN. BHD.
Mechanical installation and relocation works for project Morph part 1 & 2 at IDS factory Shah Alam
Dec 2011
36
NESTLE MANUFACTURING (M) SDN. BHD.
Dismantling and removing 2 units old hydration tanks and replacing 2 new tanks in its place at 1st floor yoghurt line at Nestle PJ. Dismantling of 1 additional tank, platform and staircase for access and reinstalling after completion.
Nov 2011
37
HIROTAKO ACOUSTICS SDN. BHD.
Installation of machinery from China (9 X 40' + 1 X 20' Containers) and Unstuffing, moving and transfering 2 x 40GP Containers

Oct 2011

38
BARRY CALLEBAUT MALAYSIA SDN. BHD.
Mechanical installation works of new chocolate & compound equipment at Barry Callebaut

Oct 2011

39
ALIRAN TENAGA TECHNOLOGY SDN. BHD.
Insurance, lifting, moving, loading, customs clearance, transportation from Flextronics Singapore to Flextronics Penang, unloading, moving and lifting 2 units 600T & 1 unit 400T Komatsu Press machine c/w accessories.

Sept & Oct 2011

40
SAIYAKAYA (M) SDN. BHD.
Unstuffing and unloading 6 x 40' containers containing oven unit at Saiyakaya, Rawang

Sep 2011

41
SABIC INNOVATIVE PLASTICS (M) SDN. BHD.
Relocation of 1 complete PC extrution line and all associated equipment from Sabic factory in Klang to Baroda, India

Sep 2011

42
SAIYAKAYA (M) SDN. BHD.
Unloading, unpacking and installing 3 layers co-extrusion internal bubble cooling haul-off film production line at Saiyakaya, Rawang

Sep 2011

43
DENSO (M) SDN. BHD.
Al-Radiator step IV head process layout change - machine removal, shifting, reinstallation and levelling at Denso, Bangi Thermal Plant (total 5 units of machine)

Aug 2011

44
NESTLE MANUFACTURING (M) SDN. BHD.
Cleaning & packing 1 complete roaster machine c/w accessories into 1  box including transport to  Freightmark warehouse from Nestle Shah Alam

Aug 2011

45
LEADER CONTAINER
Vacuum packing 12 boxes and normal packing 1 box of sound systems

Jul 2011

46
HIROTAKO ACOUSTICS SDN. BHD.
Unstuffing 3 x 40'OT, 6 x 40GP and 1 x 20GP containers, moving and transfering boxes to Hirotako warehouse at Shah Alam

Jul 2011

47
LEADER CONTAINER
Vacuum packing 2 boxes and normal packing 3 boxes of oil and gas equipment (2 tanks, 1 pump, 1 counter set)

Jul 2011

48
LEADER CONTAINER
Vacuum Packing into 7 wooden boxes for LED TV's

Jun 2011

49
CADBURY CONFECTIONERY MALAYSIA SDN. BHD.
Unstuffing 1 x 40' container, unpacking, moving and positioning machine at Cadbury, Shah Alam

May 2011

50
TIONG NAM HEAVY TRANSPORT & LIFTING SDN. BHD.
Moving 1 unit Tank out of Tioxide Factory in Kemaman Terengganu

Mar 2011

51
NANOSCAN TECHNOLOGIES SDN. BHD.
Moving out, packing and forwarding of 1 unit G.E Scanner from Kluang, Johor to Port Klang

Mar 2011

52
AIDA STAMPING TECHNOLOGY (MALAYSIA) SDN. BHD.
Relocated 5 rolls refiner from store to line 2

Feb 2011

53
DENSO (M) SDN. BHD.
Demolition and construction of WWTP

Feb 2011

54
NESTLE MANUFACTURING (M) SDN. BHD.
Unstuffing 20' container, lifting, unpacking and possition one (1) tunnel at Nestle, Petaling Jaya complete set spray packer and shrink

Jan 2011

55
BI-LINK SHANGHAI
Dismantling, packing and forwarding of machineries from Ulu Tiram, Johor to Shanghai, China

Jan 2011

56
NESTLE MANUFACTURING (M) SDN. BHD.
Installing 1 complete yoghurt filler at Nestle P.J. Plant

Jan 2011

57
NESTLE MANUFACTURING (M) SDN. BHD.
Dismantling 1 set fog pillar conveyor  for access and reinstalling the  conveyor after completion during  the Chinese New Year public holiday  3rd Feb & 4th Feb 2011 at Nestle P.J.

Jan 2011

58
NESTLE MANUFACTURING (M) SDN. BHD.
Dismantling and removing 2 units incubation tanks (1.5 tons) at 1st floor yoghurt line at Nestle, PJ

Jan 2011

59
NESTLE MANUFACTURING (M) SDN. BHD.
Packing one (1) set conveyors from Tokiwa line, one (1) unit holding tube and (1) unit existing machine at storage yard at Nestle P.J.

Jan 2011

60
KINOX KOGYO SDN. BHD.
Remove one unit Transfomer from substation to store and replace new unit onto Faudation

Dec 2010

61
NANOSCAN TECHNOLOGIES SDN. BHD.
Moving out, packing and shipping of one (1) unit Hitachi Scanner from Damansara to Chennai, India

Dec 2010

62
NANOSCAN TECHNOLOGIES SDN. BHD.
Moving out, packing and shipping of one (1) unit Hitachi Scanner from Kuching to Chennai, India

Dec 2010

63
BL SPECIALTIES MALAYSIA SDN. BHD.
Vacuum Packing of S&P machine, A&M Machine, LCD TV's and IT equipment

Dec 2010

64
NESTLE MANUFACTURING (M) SDN. BHD.
Dismantling 1 complete Seral Filling Machine C/W Panel and 1 Unit Bottle Unscramble send to Seral Workshop and return after repair for Installation at Nestle P.J.

Dec 2010

65
MURAMOTO TECHNICS (MALAYSIA) SDN. BHD.
Removing 2 units 300T Press Machine and repositioning of 2 Press Machine in each other place c/w installation

Nov 2010

66
KIEN HENG (M) SDN. BHD.
Moving Out and repositioning of Press Machines

Nov 2010

67
MURAMOTO TECHNICS (MALAYSIA) SDN. BHD.
Installation of Machinery at Kien Heng Factory at Seri Kembangan

Nov 2010

68
CADBURY CONFECTIONERY MALAYSIA SDN. BHD.
Unstuffing 2x20' containers, moving, positioning and Installing machine at Cadbury Shah Alam, Selangor

Nov 2010

69
MASTER PLAN CONSULTING SDN. BHD.
Relocation of 3 pcs, servers, monitor, racks and IT equipments from Bangunan Dayabumi Kuala Lumpur to Wisma UOA, Bangsar

Oct 2010

70
CADBURY CONFECTIONERY MALAYSIA SDN. BHD.
Unpack and positioning on wooden base 2 units Machine at Cadbury Shah Alam, Selangor

Oct 2010

71
MURAMOTO TECHNICS (MALAYSIA) SDN. BHD.
Installation 1 Unit 400 Ton KomatsuPress Machine Including assembly at Kien Heng Factory in Seri Kembangan 

Oct 2010

72
BI-LINK (M) SDN. BHD.
Moving 1 unit Komatsu,1 unit Bruder Press Machine, 5 units Drilling Machine, 1 unit Lathe Machine, 1 unit Granite Table, 5 units work tables and 2 units Lifters from factory A to Factory B at Ulu Tiram, Johor

Oct 2010

73
BI-LINK (M) SDN. BHD.
Dismantling, packing and stuffing onto container of  2 units Press machine (Kyori & Yamada Dobby) and 3 units of Straighteners at BI-Link, Ulu Tiram, JB

Aug 2010

74
FUJITSU COMPONENT (M) SDN. BHD.
Dismantling 2 units Old Robots from Moulding Machines, Installation of 4 new Yushin SA-150 Robots onto Moulding Machine and with option of placing the 2 units of Old Robots on Purpose Built wooden base.

Jul 2010

75
BI-LINK (M) SDN. BHD.
Dismantling, Packing and stuffing onto container of 2 units press machine (Kyori & Yamada Dobby), 3 Units of Straightners and 2 Units Levellers at Ulu Tiram, JB

Jul 2010

76
LEEDS INTERNATIONAL (M) SDN. BHD.
Relocation 2 units Die Casting Machine and 1 Units Oven c/w accessories from Puchong toTeluk Gong 

Jul 2010

77
HUNTER DOUGLAS (M) SDN. BHD.
Unstuffing 2x 40' Containers, moving and positioning into factory at Shah Alam, Selangor

Jun 2010

78
GREENLINES INTEGRATED (M) SDN. BHD.
Stuffing 6x 40' GP Containers, Loading, unloading and Haulage from Pinggiran Subang to Port Klang

June 2010

79
BI-LINK (M) SDN. BHD.
Dismantling, packing and forwarding of 2 Units Horizontal Moulding machine from Ulu Tiram, Johor to Shanghai ,China 

June 2010

80
PSS MANUFACTURING (M) SDN. BHD.
Installation of 4 Units Spiral Conveyors, 2 units palletiser & 1 lot conveyors at Pemanis Factory

June 2010

81
PACKAGING SALES & SERVICE
Loading Depalletiser platform and equipment in addition to 2 other machine, transportation To Dumex warehouse & unloading equipment

May 2010

82
CARGO PARTNER GMBH
Packing into wooden cases and fumigation 2 units machine at B.Braun Medical Industries, Penang
Mar 2010
83
NICOM STEEL CENTRE (M) SDN. BHD.
Dismantling of Slide of Press Machine at Nicom Steel

Mar 2010

84
NESTLE MANUFACTURING (M) SDN. BHD.
Moving 1 Unit Stivk Packing Machine and 1 unit  PG11 Counting Machine c/w accessories from  JIM Warehouse to Nestle PJ 

Mar 2010

85
TIONG NAM HEAVY TRANSPORT & LIFTING SDN. BHD.
Moving 1 unit Tank in Kemaman, Terengganu

Mar 2010

86
NESTLE MANUFACTURING (M) SDN. BHD. (SA)
Loading, transport to JIM Warehouse, cleaning, packing fumigation & forwarding 1 unit Gericke Mixer to Sydney, Australia

Mar 2010

87
SR LINERS ENTERPRISE
Relocation of servers/ IT equipment from HP Tower to Cyberjaya

Mar 2010

88
TEXAS INSTRUMENT MALAYSIA SDN. BHD.
Jacking up 2-3 feet ,1 unt Towa Machine onto reinforced bloksfor repairs and lowering machineafter complete
Mar 2010
89
NESTLE MANUFACTURING (M) SDN. BHD. (SA)
Moving 1 Unit Filling Machine in 1x20' container from Nestle Shah Alam to Inox warehouse, Unstuff container and deliver empty container to Port

Feb 2010

90
NESTLE MANUFACTURING (M) SDN. BHD. (SA)
Moving 1 Unit Filling Machine in 1x20' container from  Nestle Shah Alam to Inox warehouse, Unstuff container and deliver empty container to Port

Feb 2010

91
MURAMOTO TECHNICS (M) SDN. BHD.
Dismantling Slide, Load and transport to Johor Bahru for overhaul and return after repair and reinstall at Kien Heng

Jan 2010

92
INTEL PENANG
Packing, loading, transport to multi places and freight to multiple places

Dec 2009

93
PSS MANUFACTURING (M) SDN. BHD.
Relocation of Depalletiser

Dec 2009

94
KIEN HENG (M) SDN. BHD.
Moving in, positionong, levelling & Allignment of 1 Unit 300T Aida Press and 1 unit 250T Seyi Press Machine

Dec 2009

95
PERODUA ENGINE MANUFACTURING (M) SDN. BHD.
Installation of new JTEK Machine including Piping and electricalwork for new machine

Nov 2009

96
NESTLE MANUFACTURING (M) SDN. BHD.
Dismantling and laying down 3 units Soya Souce storage tanks C/W Platform, Mixers and loading ontolorries at Nestle PJ Plant

Oct 2009

97
NESTLE MANUFACTURING (M) SDN. BHD.
Dismantling 1 Complete Soya Making Line and Moving to temporary storage area at Nestle PJ Plant

Oct 2009

98
CADBURY CONFECTIONERY MALAYSIA
Unstuffing Machinery from 2x40 & 1x20 container Unpacking and Positioning Equipment in Cadbury S.Alam

Oct 2009

99
PERODUA ENGINE MANUFACTURING SDN. BHD.
Overhaul activities for OP4 and OP7

Oct 2009

100
COLGATE PALMOLIVE (M) SDN. BHD.
Removing Large Boxes & Transferto New Location,  Dismantling and Reinstall Steel Partition, relocation  existing DB, Rewiring andreconnection DB

Sep 2009

101
INOX ENGINEERING SDN. BHD.
Moving Out 1 Unit Mixer & acc.and  moving in New Mixer and Removing 1 Unit Storage Tank from1 st floor and unloading Tank  to ground floor at Nestle Shah Alam

Sep 2009

102
PSS MANUFACTURING (M) SDN. BHD.
Removal of 2 machinery to store, removal of Conveyors for access and reinstall 2 units machine and conveyor in its place at Dumex factory in Nilai

Sep 2009

103
SABIC INNOVATIVE PLASTICS (M) SDN. BHD.
Relocation of 8 Extrusion Line and all associated utilities & service from Sabic Factory in Senawang to Multiple destinations. Volume: 820.29 M3

Jul 2009

104
TEXAS INSTRUMENT (M) SDN. BHD.
Jacking up 2-3 feet, 1 Unit TOWA -D271 Machine onto Reinforced Block for repair and lowering machine after complete & Rental of 2 Units 10T Toe Jacks, 1 Unit Cylinder Jack  Timber dunnage material

Jul 2009

105
AIDA STAMPING TECHNOLOGY (M) SDN. BHD.
Jacking Up 1 Unit 45 Ton Fin Machine, Remove cushion, repair cushion, Reinstall cushion and  final level lingat MCM Shah Alam

Jul 2009

106
PANASONIC COMPRESSOR (M) SDN. BHD.
Making Aluminium Foil Bag for 1 unit Furnace machine ceramic blanket

Jul 2009

107
NESTLE MANUFACTURING (M) SDN. BHD.
Unstuffing 3x40' Containers, moving & positioning at temporary storage and tarpaulin cover for all machine

Jul 2009

108
HOLGER WIEGERSHAUS
Packing 5 Units of Microscope into wooden box. Volume: 19.5 M3
Jun 2009
109
BIO SYNERGY (M) SDN. BHD.
Transportation 3 units Freezer from Glenmarie to Pusat Darah Negara, Mimos Berhad & University Malaya

May 2009

110
PRIORITY SYNERGY SDN. BHD.
Unstuffing 2x40' Containers & move equipment into shop lot in Serdang

May 2009

111
ARROW EXPRESS (M) SDN. BHD.
Remove 3 Transfomer Coils and replace 3 new Coils in its place at Pavillion, Kuala Lumpur
Apr 2009
112
IEC INDUSTRIAL ENGINEERING (M) SDN. BHD.
Dismantling , Moving, Packing, Forwarding & Door to door delivery of 1 Complete Resin making Machinery c/w Utilities, goods lift & Platform from Sg. Kadut Singapore to Subang 2, Shah Alam , Selangor. Volume: 1800 M3

Mar 2009

113
DENSO (M) SDN. BHD.
Unloading, Unstuffing, Moving, Positioning Line setting and aligning 10 Cases of Fin Forming Machine & core assembly Machine and its accessories at Denso's Bangi Plant

Feb 2009

114
PERODUA ENGINE MANUFACTURING SDN. BHD.
MHI Machine OP05 Overhaul activities

Feb 2009

115
TMEH ENGINEERING (M) SDN. BHD.
Transportation from Port Klang to Perodua factory, Unpacking and installing LA,LP & ZK Machinery c/w accessories at factory. Volume : 194.55 M3

Jan 2009

116
MISSION FOODS (M) SDN. BHD.
Installing of New Pizza 2 Line incl. 3rd Press & Packing Line including  assembly at Mission Foods in P.Klg. Volume : 150 M3

Jan 2009

117
MURAMOTO (M) SDN. BHD.
Installation 6 Units 250 Ton Press Machine ,1 Unit Degreaser Machine and 1 unit 300 Ton Press Machine at Kien Heng Factory, Seri Kembangan

Jan 2009

118
KIEN HENG (M) SDN. BHD.
Moving in Positioning, Levelling &  Allignment of 2 units 250T Aida Press and moving out 2 Units 200T Press Machine

Jan 2009

119
DENSO (M) SDN. BHD.
Dismantling, Packing and Forwarding of 2 Units Forming Machine from Denso Bangi to Xingang, China. Volume : 106.33 M3

Dec 2008

120
COLGATE PALMOLIVE (M) SDN. BHD.
Dismantling, cleaning, packing, forwarding  and freight of line 2 and Line 5 Soap Manufacturing equipment from CP Malaysia to South Africa. Volume : 110.63

Nov 2008

121
CARGO LOGISTICS (M) SDN. BHD.
Relocation 1 unit Statue at bukit Gasing to Bukit Tinggi Resort, Pahang

Nov 2008

122
MURAMOTO TECHNICS (M) SDN. BHD.
Installation 1 Unit 500 Ton Press Installation 1 Unit 500 Ton Press Kein Heng

Nov 2008

123
NESTLE MANUFACTURING (M) SDN. BHD.
Unpacking, cleaning and repacking1 unit Bossar Machine, Electrical Panel and accessories into water proof wooden case c/w vacuum packing at Nestle, P.J. Volume: 2.98m3

Nov 2008

124
MURAMOTO TECHNICS (M) SDN. BHD.
Installation 6 Unit Press Machine Installation 6 Unit Press Machine. Volume: 500M3

Oct 2008

125
PANASONIC COMPRESSOR (M) SDN. BHD.
Loading and Ship to Shanghai, China. Volume: 2.53 M3

Sep 2008

126
DENSO (M) SDN. BHD.
Dismantling, removal and loading on to lorries of  one Spray painting Line and 1 Drying Oven for Scrap Purposes at Denso, Bangi. Volume: 18.25 M3

Sep 2008

127
PANASONIC COMPRESSOR (M) SDN. BHD.
Installation of 1 Unit FA Cooling Zone At Nicom Steel, Bangi. Volume: 20M3

Aug 2008

128
TEST & MEASUREMENT ENTERPRISES
Unpack, packing, forwarding and logistic from JIM's warehouse to Muar and return and from Port Klang toMuar, Johor . Volume: 10.14 M3

Jul 2008

129
COLGATE PALMOLIVE (M) SDN. BHD.
Unpack, repack and repair wooden boxes at Colgate Palmolive

Jun 2008

130
MORY-TNTE MODIAL EXPRESS
Fumigation and Stuffing into containers

Jun 2008

131
PANASONIC COMPRESSOR (M) SDN. BHD.
Loading and Ship to Shanghai, Chaina. Volume: 9.62M3

Jun 2008

132
CARGO LOGISTICS MANAGEMENT
Load Machinery at Port Klang and Unload at Bukit Tengku, Kuala Lumpur. Volume:150 M3

Jun 2008

133
DENSO (M) SDN. BHD.
Dismantling, removal and loading on to lorries one complete evaporator line for scrap purposes. Volume: 40.0m3
May 2008
134
PANASONIC HA-AIR CONDITIONING
Installation of humidity chamber from ground floor to 2nd floor. Volume: 12.0m3

May 2008

135
CITY MOVERS WORLDWIDE SDN. BHD.
Shifting 1 unit machine with 2 boxes to ground floor. Volume: 8.0m3
Apr 2008
136
TRT ENGINEERING (M) SDN. BHD.
Combined cyclic corrosion tester. Volume: 3.0m3

Mar 2008

137
TRT ENGINEERING (M) SDN. BHD.
Installation of platform for transferring of equipment. Volume: 5.0m3

Mar 2008

138
PANASONIC HA-AIR CONDITIONING
Installation of multi PSY room (K), equipment and labour. Volume: 32.0m3

Mar 2008

139
NESTLE MANUFACTURING (M) SDN. BHD.
Cleaning, packing, stuffing into container and forwarded line 5 Wolf Satchet Line to Surabaya, Indonesia. Volume: 25.17m3

Mar 2008

140
COLGATE PALMOLIVE (M) SDN. BHD.
Dismantling of machinery. Volume: 319.43m3

Mar 2008

141
AIDA STAMPING TECHNOLOGY
Dismantling of machinery at Kein Hing and shipped to Hai Phong, Vietnam. Volume: 55.57m3

Mar 2008

142
PANASONIC COMPRESSOR
Installation of 2 units FA cooling zone. Volume: 80m3

Feb 2008

143
SILVER ROYAL GROUP
Dismantling & removal of SO3 Plant transporting, loading of cargoes transporting, loading of cargoes . Volume: 500m3

Jan 2008

144
BM CHEMICALS
Dismantling of machineries, packing  and transporting, loading into containers & freighting to Genoa,Italy. Volume: 100m3

Jan 2008

145
Early Jan.'08
Dismantling of equipments at 2nd floor, shifting to roof top . Volume: 120m3

Jan 2008

146
PANASONIC COMPRESSOR
Shifting of one unit die casting machine from Picom to Nicom Steel,  Bangi with shrink wrap. Volume: 150m3

Dec 2007

147
NICOM STEEL CENTRE
Dismantle of rack and other items at PCOM and deliver to Nicom Steel. Volume: 100m3

Dec 2007

148
NICOM STEEL
Dismantling of machinery, shifting and installing of machinery. Volume: 200m3

Dec 2007

149
BRANDTEC (S) PTE. LTD.
Installing of machinery. Volume: 150m3

Nov 2007

150
PANASONIC COMPRESSOR
Dismantling of machinery, shifting and installing of machinery. Volume: 100m3

Nov 2007

151
PANASONIC R & D
Dismantling of machinery. Volume: 80m3

Nov 2007

152
TMEH MANUFACTURING SDN. BHD.
Installtion of machinery. Volume: 100m3

Aug 2007

153
NICOM STEEL
Internal shifting of fourteen units small press machineries . Volume: 100m3

Jul 2007

154
DAVCO CONSTRUCTION
Relocation, Packing, Transporting, Piping and Welding (Location: Bukit Kemuning, Shah Alam). Volume: 2,000m3

Jun 2007

155
CMS STEEL BERHAD
Dismantling, Packing, Loading of Cargo, Marking, Export Shipment (Location: Kuching, Sarawak). Volume: 23,000m3

Apr 2007

156
MT PICTURE DISPLAY
Mechanical Engineering and Civil Work Dismantling and removing machineries. Volume: 5,000m3

Feb 2007

157
TMEH MANUFACTURING SDN. BHD.
Installation, Piping, Unpacking, Shifting and Marking at Perodua, Rawang. Volume:960m3

Dec 2006

158
TMEH MANUFACTURING SDN. BHD.
Installation, Piping, Unpacking, Shifting and Marking at Perodua, Rawang. Volume:770m3

Aug 2006

159
S R LINER ENTERPRISE
Packing, Loading, Shifting, UnPacking, Unloading and Positioning servers/ IT equipment  from HP Data Centre,PJ to Glenmarie. Volume: 247m3

Aug 2006

160
TIONGNAM HEAVY TRANSPORT
Unloading, Unpacking, Positioning & moving 3 units Press Machine at Shimano Factory, Johor. Volume: 381m3

Aug 2006

161
TMEH MANUFACTURING SDN. BHD.
Installation, Piping, Unloading, Positioning, & Unpacking one unit ENSHU Machine at Perodua,Rawang. Volume: 762m3

May 2006

162
TMEH MANUFACTURING SDN. BHD.
Installation, Piping, Unpacking, Positioning, Levelling & Moving at Perodua, Rawang. Volume: 593m3. Volume: 593m3

May 2006

2005back to top
163
TMEH MANUFACTURING SDN. BHD.
Installation, Piping, Unpacking, Shifitng and Marking at Perodua, Rawang. Volume:395m3

Dec 2005

164
AIDA STAMPING (M) SDN. BHD.
Installation, Unloading, Unpacking and Assembling 1 unit HMX 300 ton Press Machine. Volume: 247m3

Oct 2005

165
AIDA STAMPING (M) SDN. BHD.
Transfering, Shifting, Transporting, Loading and Unloading. Volume: 1,068m3

Jun 2005

166
AIDA STAMPING (M) SDN. BHD.
Shifting and transporting machinery to MAMM Factory in Sungai Petani. Volume:675m3

Apr 2005

167
AIDA STAMPING (M) SDN. BHD.
Dismantling, Packing, Warehousing, Transporting and Export Shipment. Volume:1,575m3

Mar 2005

168
AIDA STAMPING (M) SDN. BHD.
Dismantling, Loading on Low Loader and transport crown. Volume: 498m3

Feb 2005

169
SAFA INDUSTRIAL GROUP
Dismantling, packing, Transporting & Purchase containers in Sg. Petani. Volume:11,000m3

Nov 2004

170
AIDA STAMPING (M) SDN. BHD.
Dismantling, Loading on Low Loader and deliver 300 ton Press Machine to AMM, JB. Volume: 445m3
Oct 2004
171
NICOM STEEL
Installation, Unloading, Transporting and Documentation for Custom Clearance. Volume: 340m3
Sep 2004
172
NESTLE FOODS (M) SDN. BHD.
Marking, Dismantling, Packing, Stuffing, Forwarding, Cleaning and freight moulding line to Hamburg. Volume: 2,600,3

Aug 2004

173
NOVABOND MARKETING
Dismantling, Reinstallation and Constructing. Volume: 550m3

Aug 2004

174
MAEM, SUNGAI PETANI
Marking, Dismantling, Packing, Stuffing, Forwarding & Transporting Macomrad and ST Room. Volume: 2,000 m3
Dec 2003
175
AIDA STAMPING TECHNOLOGY
Installation of 1 unit of Aida Press Machine

Dec 2003

176
MATSUSHITA INDUSTRIAL CORP.
Marking, Dismantling, Packing. Volume: 122m3

Nov 2003

177
MAEM, SUNGAI PETANI
Marking, Dismantling, Packing, Stuffing, Forwarding Transporting & Installation THL Line machine. Volume: 660 m3

Oct 2003

178
MAEM, SUNGAI PETANI
Marking, Dismantling, Packing, Stuffing, Forwarding Transporting & Installation Press machine PDA. Volume: 606 m3

Oct 2003

179
MAEM, SUNGAI PETANI
Marking, Dismantling, Packing, Stuffing, Forwarding Transporting & Installation. Volume: 5,500 m3

Oct 2003

180
AIDA STAMPING (M) SDN. BHD.
Dismantling, Packing and Shifting HMX 400U machine. Volume: 300m3

Sep 2003

181
NESTLE FOODS, NS (AUST)
Marking, Dismantling, Packing, Stuffing, Forwarding and Transporting Soft Chew Line. Volume: 1,000 m3

Sep 2003

182
COLGATE PALMOLIVE
Dismantling, Reinstall and Modification Amalgamator. Volume: 100 m3

Aug 2003

183
CADBURY CONFECTIONERY
Electrical work, Rework System, Internal shifting. Volume: 100 m3

Jul 2003

184
AIDA STAMPING (M) SDN. BHD.
Dismantling, Packing and Shifting. Volume: 120m3
Jul 2003
185
AIDA STAMPING (M) SDN. BHD.
Dismantling, loading / unloading, packing and transfering. Volume: 2,250 m3

Jul 2003

186
NESTLE FOODS, NS (INDO)
Marking, Dismantling, Packing, Stuffing, Forwarding & Transporting Sugar Hi Boil Line. Volume: 1,000 m3

Jun 2003

187
MATSUSHITA INDUSTRIAL
Dismantling and Export shipment to Xiamen, Fujian, China

Jun 2003

188
AIDA STAMPING (M) SDN. BHD.
Dismantling of machinery from Press Machine with reinstallation. Volume: 510 m3

May 2003

189
COLGATE PALMOLIVE
Dismantling, Cleaning, Forwarding & Packing. Volume: 120 m3

Apr 2003

190
AIDA STAMPING TECHNOLOGY
Dimantling, Transporting of Machinery. Volume : 70 m3

Apr 2003

191
NESTLE FOOD, PJ (GHANA)
Packing, forwarding & Shipping I unit duplex slitter, 1 unit karges hammer to Santiago. Volume : 40 m3

Mar 2003

192
AE AUTOMOTION SDN. BHD.
Dismantling and Installing 2 sets  Chain Pallet Conveyor. Volume  : 80 m3

Feb 2003

193
UNILEVER BKT. RAJA
Relocation of 1 complete Ice cream to Syria.
Jan 2003
194
NESTLE, PJ (CHILE)
Packing, forwarding & Shipping I unitduplex slitter, 1 unit karges hammerto Santiago. Volume :  40 m3

Jan 2003

195
PERODUA
Design, Fabricate, Supply & Install, Test and Commissioning the installation work. Volume : 2,500 m3

Dec 2002

196
AIDA STAMPING (MAEM)
Installation of 1 unit PMX 200 ton Press & 1 unit HM X 300 ton Press machine in Sungai Petani. Volume  :  140 m3

Nov 2002

197
PROTON - TANJUNG MALIM
Full mechanical & Electrical Cylinder Head machinery line. Head machinery line

Oct 2002

198
UNILEVER BKT. RAJA
Relocation of 1 complete Ice cream Relocation of 1 complete Ice cream

Oct 2002

199
ASAHI KOSEI
Installation of 2 units melting furnace. Volume : 60 m3

Oct 2002

200
AIDA STAMPING
Installation of 1 unit 300 ton HMX Press Machine. Volume : 75 m3

Oct 2002

201
HENRY BUTCHER INDUSTRIAL
Dismantling, packing, forwarding & freight of Ice Cream Plant to Iran. Volume:140 cbm

Sep 2002

202
MATSUSHITA COMPRESSOR
Dismantling, transporting of FIN Presses from Sungai Way. Unloading & installation in Shah Alam & Pasir Gudang. Volume: 145 cbm

Aug 2002

203
MATSUSHITA COMPRESSOR
Dismantling, transporting of brushles rotor line from Shah Alam. Unloading & installation in Sg Petani, Kedah. Volume: 2,800 cbm

May 2002

204
NESTLE FOODS (M) SDN. BHD.
Dismantling, packing, forwarding & freight of Noodle Manufacturing Line to Switzerland. Volume: 70 cbm

May 2002

205
HENRY BUTCHER INDUSTRIAL
Dismantling, packing and stuffing 1 unit of ING YU Press from Gambangto South Korea. Volume: 50 cbm

Apr 2002

206
SANDEN AIR CONDITIONING
Transport, unload position and install 1 unit of NCS-200 Press Machine c/w feeder & uncoiler. Volume: 60 cbm

Mar 2002

207
CADBURY CONFECTIONERY
Fabrication and installation of machinery. Volume: 30 cbm

Mar 2002

208
TNB LOGISTICS SDN. BHD.
Relocation of 2 units 30MVA (60 tonnes/unit) power transformer from West Port to PMU Kampar, Perak including jacking & skidding onto foundation. Volume: 80 cbm

Mar 2002

209
KEIN HING INDUSTRY SDN. BHD.
Dismantling of press machine. Volume: 60 cbm

Feb 2002

210
FERROUS METALS SDN. BHD.
Relocation of slitting line from Ijok to Subang Jaya. Volume: 100 cbm

Feb 2002

211
PROTON CASTING
Unloading, unpacking, installation & commissioning of Naniwa Core Making Machines. Volume: 450 cbm

Jan 2002

212
CADBURY CONFECTIONERY
Fabrication and installation of Petzholdt Super Conche. Volume: 40 cbm

Jan 2002

213
KEIN HING INDUSTRY SDN. BHD.
Installation of press new machine. Volume: 100 cbm

Jan 2002

214
HAJIESA ENTERPRISE
Shifting of machinery from old building to new building. Volume: 250 cbm

Jan 2002

215
CADBURY CONFECTIONERY
Fabrication and installation of chocolate moulding line. Volume: 160 cbm

Dec 2001

216
NESTLE FOODS (M) SDN. BHD.
Transporting of AHU from Chembong. Unloading & Positioningin Petaling Jaya.Volume: 70 cbm

Dec 2001

217
MATSUSHITA COMPRESSOR
Dismantling, transporting of brushless rotor line from ShahAlam. Unloading & installation in Sungai Petani, Kedah.Volume: 130 cbm

Nov 2001

218
MATSUSHITA COMPRESSOR
Dismantling, transporting of machinery from Shah Alam and unloading all machinery in Bukit Mertajam.Volume: 40 cbm

Oct 2001

219
NESTLE FOODS (M) SDN. BHD.
Vacuum packing, forwarding andfreight of 2 units press machines &1 unit scroll shear to Mexico.Volume: 150 cbm

Oct 2001

220
NESTLE FOODS (M) SDN. BHD.
Dismantling and transporting of bulk oil tank, can washers, hoppers& silos, removal to storage area.Volume: 210 cbm

Oct 2001

221
HUNTER DOUGLAS MFTG
Dismantling, refurbishing, packing& loading of specified plants into containers to freight to China.installation of those plants in China.Volume: 2,400 cbm

Sep 2001

222
NGEAM ENGINEERING WORKS
Vacuum packing of machinery,transporting, loading and securinginto containers. Volume: 100 cbm
Sep 2001
223
MATSUSHITA COMPRESSOR
Unloading, unpacking, positioning,leveling, installation of 300 ton press machine & sound proof room.Volume: 150 cbm

Sep 2001

224
MATSUSHITA COMPRESSOR
Dismantling, packing & transportingpress machine to Singapore. Transport back again to Shah Alamfor reinstallation.Volume: 70 cbm
Sep 2001
225
VESSELTECH
Vacuum packing & transporting filter press machine from Balakongto Jakarta.Volume: 30 cbm

Jul 2001

226
AIDA STAMPING
Dismantling, packing & transportingpress machine to Pasir Gudang, JB.Volume: 60 cbm

Jul 2001

227
PALM OIL DEVELOPMENT
Installation of Press, valmat and Diffenbacher machines - Bangi Baru. Volume: 120 cbm

Jul 2001

228
NESTLE FOODS (M) SDN. BHD.
Packing, forwarding & freight of Soudronic Welding machine from Port Klang to Rotterdam, Holland.

Jun 2001

229
DENSO (M) SDN. BHD.
Dismantling, removal, vacuum packing, stuffing into containers, transport to Port Klang.Volume: 200 cbm

Jun 2001

230
DIAMET KLANG (M) SDN. BHD.
Fabricate platform for powder mixer at site.

Jun 2001

231
AIDA STAMPING
Unloading, unpacking, moving,positioning, installation of Aidapress machine at Port Klang.Volume: 190 cbm

Jun 2001

232
DIAMET KLANG (M) SDN. BHD.
Electrical installation of powder mixing area.

May 2001

233
KAUSAR CORPORATION SDN. BHD.
Unstuffing, unpacking, moving &positioning  of machinery at MalaccaTraining School (Alor Gajah).Volume: 1,500 cbm

May 2001

234
AIDA STAMPING
Piping & electrical work at MTB Pekan Pahang.

May 2001

235
ASAHI KOSEI (M) SDN. BHD.
Transporting 15 units furnaces fromPort Klang to Balakong, unloading,unpacking, shifting & positioning.Volume: 210 cbm

Apr 2001

236
KUB-FUJITSU
Dismantling, transporting &  re-installation of machinery from Batu Tiga factory to Bukit KemuningVolume: 360 cbm

Apr 2001

237
ELECTRICSOLA (M) SDN. BHD.
Unloading, shifting, positioning & installation of 1 unit of generator. Volume: 60 cbm

Mar 2001

238
NESTLE FOODS (M) SDN. BHD.
Dismantling, packing & relocation and re-installation of milo manufacturing facility from Surabaya to Chembong, Malaysia.Volume: 860 cbm

Feb 2001

239
MATSUSHITA COMPRESSOR
Internal shifting machinery withinthe premises, installation of bodymould, winding machine & etc. Volume: 750 cbm

Feb 2001

240
NESTLE FOODS (M) SDN. BHD.
Dismantling of dryers in Thailand,relocation & re-installation inShah Alam. Volume: 100 cbm

Feb 2001

241
HOLLAND TRANSTRADE
Dismantling, relocation & re-installation of truck axle assembly plant equipment.Volume: 430 cbm

Jan 2001

242
NESTLE FOODS (M) SDN. BHD.
Dismantling & removal of milk plant machinery from Nestle Shah Alam & reinstallation of newcereal equipment.Volume: 900 cbm

Dec 2000

243
TRW
Dismantling, packing, relocation &re-installation of braking systemmanufacturing equipment from Thailand to Malaysia. Volume: 1,400 cbm

Nov 2000

244
FEDERAL PAINTS
Dismantling, packing & relocation of plant making facility fromSingapore to Malaysia.Volume: 300 cbm

Nov 2000

245
NESTLE FOODS (M) SDN. BHD.
Dismantling, packing & relocation of condensed milk line to Thailand. Volume: 1,600 cbm

Sep 2000

246
HONG LEONG YAMAHA
Dismantling of casting plant removal, packing & relocation to Japan. Volume: 500 cbm

Sep 2000

247
GENTING SANYEN POWER PLANT SDN. BHD.
Installation of conveyor system. Volume: 400 m3

May 2000

248
HITACHI AIRCON SDN. BHD.
Off load, unpack & installation of production line. Volume: 386 m3

Apr 2000

249
ALUMINIUM INDUSTRIES SDN. BHD.
Installation of foil mill line. Volume: 2,200 m3

Apr 2000

250
ROTHMANS (M) SDN. BHD.
Relocation of cigarette making equipment from MTC to Rothmans. Volume: 1,920 m3

Apr 2000

251
BASF
Dismantling, packing & movingleather textile testing machinery & lab to various destination worldwideVolume: 1,500 m3
Apr 2000
252
PHILIP MORRIS (M) SDN. BHD.
Dismantling & packing of machinery for relocation to Indonesia. Volume: 200 m3

Mar 2000

253
ASAHI KOSEI (M) SDN. BHD.
Relocating, moving & positioning of production line. Volume: 300 m3

Mar 2000

254
4M (M) SDN. BHD.
Off loading & moving Perlite plywood insulation boxes. Volume: 535 m3

Jan 2000

255
MIMOS SDN. BHD.
Off loading, moving & positioning of semiconductor assembly line. Volume: 300 m3

Dec 1999

256
PHILIP MORRIS (M) SDN. BHD.
Vacuum packing & crating MDX combination to Indonesia.

Dec 1999

257
PHILIP MORRIS (M) SDN. BHD.
Vacuum packing & crating passion cigarette making & 1 MK8 cigarette making & 1 MK8.

Dec 1999

258
SETI CIGARETTE FACTORY
Dismantling, packing & crating2 SEB MK8/MAX/HCMcombination 2 sets HLP1 group combinations, 1 set Tingey JC2ripping machine for shipment to Philip Morris.

Dec 1999

259
PHILIP MORRIS (M) SDN. BHD.
Vacuum packing cigarette making machine into timber crates. Volume: 80 m3

Dec 1999

260
EUROPEAN PROFILES SDN. BHD.
Erecting 27m gantry crane to lift 20 tonne roll forming machine 28m high.

Dec 1999

261
PERODUA MANUFACTURING
Dismantling & installation of cylinder head spindle for 5 units of machines. Volume: 15 m3

Oct 1999

262
CITY METALS SDN. BHD.
Relocation of Guillotine machine & Relocation of Guillotine machine & Metal premises.

Sep 1999

263
AE AUTOMATION (M) SDN. BHD.
Installation of 2.4m width conveyor system for filter cable transport. Volume: 100 m3

Sep 1999

264
MECOMB SALES & SERVICE
Installation of 190 plate press machine including adjustment,levelling & electrical works.Volume: 180 m3

Sep 1999

265
EUROPEAN PROFILES SDN. BHD.
Dismantling, removal & packing forrelocation to Holland of several coldroll forming lines.Volume: 240 m3

Jul 1999

266
SAMSUNG ELECTRONICS DISPLAY (M) SDN. BHD.
Dismantling & packing for transferring of an electronicmanufacturing line from Senawangto Mexico. Volume: 80 m3

Jun 1999

267
AUDIO MYS (M) SDN. BHD.
Unstuffing, unpacking, set-up andinstallation of speaker box manufacturing facility in Sungai Petani, Kedah.Volume: 128 m3

Apr 1999

268
INTERNATIONAL RECTIFIERS
Intergrated circuit making machineryDismantling, moving & packing for relocation from Ipoh to Mexico. Volume: 80 m3

Apr 1999

269
BLI ORINTED CIRCUIT
Dismantling and relocation of electroplating line from Subang to Shah Alam. Volume: 120 m3

Mar 1999

270
O'HARA OPTICAL SDN. BHD.
Unstuffing, unpacking, moving & positioning of disk drive making machinery. Volume: 60 m3

Nov 1998

271
NESTLE FOODS SDN. BHD.
Unstuffing, unpacking, moving & positioning, filling & packing machines. Volume: 180 m3

Nov 1998

272
RUBFIL SDN. BHD.
Complete removal of rubber threadmanufacturing plant equipment fromSlim River to India.Volume: 140 m3

Nov 1998

273
PTB WEST WHARF
Jacking and skidding of 130 tonne unloader on board vessel at Kemaman.

Oct 1998

274
ENGTEX SDN. BHD.
Complete removal of existing plantequipment from factory in BatangBerjuntai - handle and installation at Serendah.

Oct 1998

275
SITT TATT CO. SDN. BHD.
Greasing, packing, transport and customs clearance of 1 unit of usedDeckel FP5A CNC milling machine& ship to Germany. Volume: 10 m3

Oct 1998

276
MECOMB (M) SDN. BHD.
Transporting, unloading, unpacking,moving and positioning of 2 cratestesting machine from Port Klang to Kajang. Volume: 10 m3

Oct 1998

277
GRAFITEX (M) SDN. BHD.
Dismanting of 1 unit of Flexograficprinter, loading onto transportvehicles, securing to The United Kingdom. Volume: 90 m3

Sep1998

278
TATEYAMA KOGYO (M) SDN. BHD.
Unload, move and position 1 unit of2.5 tonne mahcine, load 2 x 1 tonmachine onto lorry, off load, move,position & store. Volume: 20 m3

Sep1998

279
ASCENT TECHNOLOGIES
Movement of 1 x Amada machine from Subang Jaya. Volume: 28 m3

Sep1998

280
SUNNY PRECISION (M) SDN. BHD.
Dismantling, packing & transport for movement to Japan. Volume: 28 m3

Sep1998

281
UTMOST TECHNOLOGY IND
Dismantling, removal & packing ofpulp moulding machine & shipping to Bangkok. Volume: 53 m3

Aug 1998

282
HITACHI AIRCON PRODUCTS
Unstuffing & installation of conveyor system. Volume: 280 m3

Aug 1998

283
NESTLE FOODS (M) SDN. BHD.
Installation of machinery from 1x20ft containers into storage area.

Aug 1998

284
GENTING SANYEN
Shipping, off load, transport &delivery to site & off loading PowerPlant equipment including 1 unit of99 tonne gas turbine & 1 unit of 101 tonne generator.Volume: 1,200 m3

Jul 1998

285
PROTON BERHAD
Installation of component lab testing machines to new building. Volume: 200 m3

Jul 1998

286
SUNCHIRIN INDUSTRIES
Installation of 1 unit of Mazak machinery within premises. Volume: 30 m3

Jul 1998

287
JOHNSON & JOHNSON SDN. BHD.
Removal of complete plant for export to the Philippines. Volume: 250 m3

Jul 1998

288
FEDERAL METAL PRINTING
Installation of 1 unit of Cevolani can making combination.

Jul 1998

289
ENKEI
Relocation od CNC machines within the premises. Volume: 120 m3

Jul 1998

290
AUDIO MYS (M) SDN. BHD.
Transportation to site, unstuffing,unpacking & working machinery toPerlis via Butterworth.Volume: 300 m3

Jun 1998

291
NESTLE FOODS (M) SDN. BHD.
Installation of 1 unit of Rovema machine. Volume: 20 m3

Jun 1998

292
SUNNY PRECISION (M) SDN. BHD.
Removal from factory in Penang - 3 injection moulding machines & 1unit of 40 tons hydraulic press c/waccessories-packing,transportationto & installing in Bangkok.Volume: 180 m3

Jun 1998

293
O'HARA OPTICAL
Installation of machinery. Volume: 210 m3

Jun 1998

294
O'HARA DISKS (M) SDN. BHD.
Installation of disc making machinery.

May 1998

295
PHILIP MORRIS (M) SDN. BHD.
Installation of 2 units of GDX 1packing group machinery.Volume: 140 m

Apr 1998

296
NESTLE FOODS (M) SDN. BHD.
Installation of new production line machinery. Volume: 280 m3

Feb 1998

297
ASAHI KOSEI (M) SDN. BHD.
Mechanical installation of electronic manufacturing machinery

Feb 1998

298
HAN-MI SEMICONDUCTOR
Relocation of machinery to Korea. Volume: 240 m3

Jan 1998

299
PHILIP MORRIS (M) SDN. BHD.
Installation of passim cigarette making combination for molins. Volume: 130 m3

Jan 1998

300
PERODUA
Installation of crank-shaft manufacturing line. Volume: 1,400 m3

Jan 1998

301
CARSEM (M) SDN. BHD.
Relocation electronic manufacturing machinery to a new factory. Volume: 1,200 m3

Nov 1997

302
TRANSICOIL (M) SDN. BHD.
Dismantling, relocation andreinstallation of electronicsmanufacturing machines. Volume: 1,800 m3

Oct 1997

303
DANAVISION SDN. BHD.
Dismantling and relocation of video tape manufacturing line to Mexico. Volume: 4,200 m3

Oct 1997

304
PROTON BERHAD
Installation of crank shaft line. Volume: 1,300 m3

Aug 1997

305
O'HARA DISK, MALACCA
Installation of disk making machinery. Volume: 780 m3

Aug 1997

306
DAIBOCHI - Phase II
Dismantling & relocation of extrusion lamination lines from Malacca to Shantou, China. Volume: 200 m3

May 1997

307
PROTON
Installation of machinery at engine transmission line. Volume: 2,000 m3

Apr 1997

308
SUNNY PRECISION, PRAI
Dismantling packaging & relocation2 units of 250 tonnes capacity presses to Japan. Volume: 160 m3

Apr 1997

309
O'HARA DISK, MALACCA
Installation of disk making machinery. Volume: 1,200 m3. to Port Klang. Volume: 450 m3

Apr 1997

310
NESTLE FOODS
Installation of packaging machines. Volume: 120 m3

Mar 1997

311
ALLIED AUTO PARTS
Dismantling, relocating withinSelangor & re-installation of a motorcycle parts manufacturing facility & 17 mechanical & hydraulicpresses up to 1,200 tnns capacity. Volume: 3,200 m3

Mar 1997

312
MALAYSIAN GALVANIZED
Iron pipes removal & replacement of a melting kettle. Volume: 150 m3

Jan 1997

313
ALUMINIUM DIE CASTING
Dismantling , refurbishing & relocation of die casting plant fromAmpang to Port Klang. Volume: 450 m3

Jan 1997

314
CARSEM (M) SDN. BHD.
Relocation of front & end of lineplants to a new premises. Volume: 2,700 m3

Dec 1996

315
HITACHI ELECTRONIC - Senai
Installation of picture tube manufacturing plant. Volume: 600 m3

Dec 1996

316
SMPC METALS CONTAINER
Refurbishment facility. Dismantlingin Bangkok, shipping andre-installation in Pasir Gudang, JB. Volume: 1,800 m3

Nov 1996

317
DAIBOCHI, MALACCA - PHASE 1
Dismantling & relocation of wet anddry lamination lines from Malacca to Shantou, China. Volume: 200 m3

Nov 1996

318
SME AEROSPACE
Installation of 4,200 tonnes capacity press in Selangor. Volume: 150 m3

Nov 1996

319
COLGATE PALMOLIVE
Fabrication & installation of stack platform. Volume: 600 m3

Oct 1996

320
ALUMINIUM INDUSTRIES
Installation of cold mill. Volume: 600 m3

Sep 1996

321
BOH PLANTATIONS
Relocation of packaging plant within the country. Volume: 350 m3

Jan 1996

322
GUOLENE, MALACCA
Dismantling, (mechanical, electrical, piping),packing, transporting & shipping to Thailand. Volume: 280 m3

Jan 1996

323
LEADER UNIVERSAL CABLE, JOHOR
Unpacking, moving and completeinstallation mechanical, electrical and piping of 4 units of electric cable making lines. Volume: 2,000 m3

Jan 1996

324
HITACHI CHEMICALS (M) SDN. BHD.
Installation of circuit board manufacturing plant with a 4,500 capacity hot press machine. Volume: 7,000 m3

Dec 1995

325
SUMITOMO PHASE 2
Installation of circuit board manufacturing plant inclucing 4,000 tonnes capacity hot & cold presses. Volume: 6,000 m3

Aug 1995

326
HICOM-PETRO-PIPES SDN. BHD.

Shipping from Germany, transportation and erection of steel pipe manufacturing plant. Volume: 6,000 m3.

Supplies: KHT, SMAG, MEG Germany

Jun 1995

327
ALLIED AUTO PARTS SDN. BHD.
Transportation, erection & installation of 1 unit of clearing Niagara 400 ton press. Volume: 79.9 m3

Apr 1995

328
HILO COAST PROCESSING CO. HAWAII
Dismantling and shipping mill house equipment from Hawaii to Pakistan. Volume: 1,700 m3

May 1995

329
BLACK & DECKER (M) SDN. BHD.
Relocation of iron making facilities from Kuantan to Mexico. Volume: 420 m3

Mar 1995

330
HAMAKUA SUGAR CO. HAWAII
Dismantling & moving 6,000 tonnes per day sugar to Mindanao Island, Philippines together with total 30 megawatt power plant (turbines), generators, Tansformers and switch gears etc.. Volume: 22,000 m3

Dec 1994

331
CARSEM ELECTRONICS M'SIA
Relocation of front and end of line plants to the new premises. Volume: 3,200 m3

Oct 1994

332
SIME TREMCO (M) SDN. BHD.
Dismantling, relocation, assembly & installation of roll roofing production line from Sydney, Australia to Batang Berjuntai, M'sia. Volume:750 m3

Oct 1994

333
KAYABA (M) SDN. BHD.
Dismantling, relocation & complete installation of plant to new premises. Volume:350 m3
Oct 1994
334
TOKYO ALUMI
Installation of 2 units of mechanical presses. Volume: 150 m3

Sep 1994

335
SABAH ELECTRICITY BOARD
Off loading, moving, lowering and positioning of 2 units 270 tonnes each diesel power plants. Volume: 680 m3

Mar 1994

336
SUMITOMO ELECTRIC
Relocation of existing plant to new area. Volume: 700 m3

Feb 1994

337
PROTON CASTING PLANT
Installation of conveyor lines, Installation of conveyor lines, Volume: 700 m3

Sep 1993

338
CARSEM ELECTRONICS
Relocation of electronics testing line to Manila. Volume: 1,200 m3

Aug 1992

339
HEAVY INDUSTRIES CORP
Dismantling, relocation & installation of wheel manufacturing plants from Melbourne & Sydney to Malaysia - 26 units of mechanical presses ranging from 100 - 1,250 tonnes capacity, 8 units of hydraulic presses ranging from 250 - 500 tonnes capacity. Volume: 6,000 m3

Jul 1992

340
CITY ENVELOPES
Relocation within the country, printing machinery. Volume: 400 m3

Jul 1992

341
CHUBB MALAYSIA
Relocation within the country. Manufacturing safes & vault doors. Gelatin, shear presses & 500 tonmechanical press. Volume: 450 m3

Jun 1992

342
SUMITOMO CHEMICALS M'SIA
Installation of circuit boardmanufacturing plant with 4,000 tonscapacity hot & cold presses machine. Volume: 6,000 m3

Feb 1992

343
HITACHI CHEMICALS
Installation of circuit board manufacturing plant with a 4,500 tonnes capacity hot press machine. Volume: 10,000 m3

Sep 1991

344
HITACHI AIRCON, MALAYSIA
Installation of air-con manufacturing plant included8 units of hydraulic presses up to 1,000 tonnes.Volume: 7,000 m3

Sep 1991

345
SAMSUNG ELECTRON
Relocation, moving & positioning of picture tube manufacturing plant, Malaysia. Volume: 1,350 m3

Sep 1991

346
NITTO DENKO, SHAH ALAM
I.C. storage containers. Volume: 350 m3

Apr 1991

347
HITACHI ELECTRONICS
Installation of electronics plant equipment.

Apr 1991

348
JOEI INDUSTRIES
Installation of 6 units Hydraulic presses up to 500 tonnes capacity. Volume: 450 m3

Mar 1991

 
*For detail scope of work, please refer to us at the above address.
back to top
bottom page
 
engineering